Setting Up Git


Git is a very popular version control system. You’ll become very familiar with this piece of software throughout TOP, so don’t worry too much about understanding it at this point. There are multiple lessons focused on Git later in the curriculum.

GitHub is a service that allows you to upload your code using Git and to manage your code with a nice web interface. GitHub and Git are not the same thing or even the same company.

Step 1: Install Git

Click the Operating System you have chosen below:


Step 1.1: Update the system

Run these commands in the terminal to update the Linux system:

sudo apt update
sudo apt upgrade

Step 1.2: Install git

It’s likely you have git installed already, but to make sure that we have the most up to date version of git, run the following commands:

sudo add-apt-repository ppa:git-core/ppa
sudo apt update
sudo apt install git

Step 1.3: Verify version

Make sure your git version is at least 2.28 by running this command:

git --version

If the version number is less than 2.28, follow the instructions again.


Step 1.0: Install Homebrew

First, you’ll need to install Homebrew. Make sure you have checked the requirements here. Once you meet the requirements, copy and paste the following into your terminal:

/bin/bash -c "$(curl -fsSL"

Note: On an Apple Silicon Mac you will have an extra step to take. If you look at the terminal output after installing Homebrew, you will see “Installation Successful!”. Further down in the terminal there will be a section called “Next steps”. Reading the terminal may seem a bit intimidating, but this is a great chance to overcome those feelings. Follow the next steps as stated in your terminal (copy and paste the commands given) to add Homebrew to your PATH, which allows you to use the brew command prefix.

Step 1.1: Update Git

MacOS already comes with a version of Git, but you should update to the latest version. In the terminal, type

brew install git

This will install the latest version of Git. Easy, right?

Step 1.2: Verify version

Open a new terminal window and then make sure your git version is at least 2.28 by running this command:

git --version

If the version number is less than 2.28, follow the instructions again. If you are encountering a no formulae found in taps error: 1. Run brew doctor 2. You will see output similar to the below. NOTE: The actual output of brew doctor may vary based on the version of MacOS you’re running, and any other issues you may have with your own installation. Ultimately, you must run each command line snippet that Homebrew provides after running brew doctor in order to repair your installation of Homebrew, including brew cleanup at the end. Screen_Shot_2021-02-11_at_8 06 38_PM 4. Run brew install git, open a new terminal window, then check your version of Git, which should now be the latest version.

Chrome OS/CloudReady

You will need to install Git from source by following the instructions at this Digital Ocean tutorial.

Step 2: Configure Git and GitHub

Step 2.1: Setup Git

For Git to work properly, we need to let it know who we are so that it can link a local Git user (you) to GitHub. When working on a team, this allows people to see what you have committed and who committed each line of code.

The commands below will configure Git. Be sure to enter your own information inside the quotes (but include the quotation marks)!

git config --global "Your Name"
git config --global ""

GitHub recently changed the default branch on new repositories from master to main, change the default branch for Git using this command:

git config --global init.defaultBranch main

To enable colorful output with git, type

git config --global color.ui auto

To verify things are working properly, enter these commands and verify that the output matches your name and email address.

git config --get
git config --get

Step 2.2: Create a GitHub Account or Sign In

Go to and create an account! If you already have an account, sign in. You do not need to use the same email address you used before, but it might be a good idea to use the same one to keep things simple.

Step 2.3: Create an SSH Key

An SSH key is a cryptographically secure identifier. It’s like a really long password used to identify your machine. GitHub uses SSH keys to allow you to upload to your repository without having to type in your username and password every time.

First, we need to see if you have an SSH key already installed. Type this into the terminal and check the output with the information below:

ls ~/.ssh/

If a message appears in the console containing the text “No such file or directory”, then you do not yet have an SSH key, and you will need to create one. If no such message has appeared in the console output, you already have a key and can proceed to step 2.4.

To create a new SSH key, run the following command inside your terminal. The -C flag followed by your email address ensures that GitHub knows who you are.

Note: The angle brackets (< >) in the code snippet below indicate that you should replace that part of the command with the appropriate information. Do not include the brackets themselves in your command. For example, if your email address is, then you would type ssh-keygen -C You will see this convention of using angle brackets to indicate placeholder text used throughout The Odin Project’s curriculum and other coding websites, so it’s good to be familiar with what it means.

ssh-keygen -C <youremail>
  • When it prompts you for a location to save the generated key, just push Enter.
  • Next, it will ask you for a password; enter one if you wish, but it’s not required.

Now, you need to tell GitHub what your SSH key is so that you can push your code without typing in a password every time.

First, you’ll navigate to where GitHub receives our SSH key. Log into GitHub and click on your profile picture in the top right corner. Then, click on Settings in the drop-down menu.

Next, on the left-hand side, click SSH and GPG keys. Then, click the green button in the top right corner that says New SSH Key. Name your key something that is descriptive enough for you to remember where it came from. Leave this window open while you do the next steps.

Now you need to copy your public SSH key. To do this, we’re going to use a command called cat to read the file to the console. (Note that the .pub file extension is important in this case.)

cat ~/.ssh/

Highlight and copy the output, which starts with ssh-rsa and ends with your email address.

Now, go back to GitHub in your browser window and paste the key you copied into the key field. Then, click Add SSH key. You’re done! You’ve successfully added your SSH key!

Step 2.5 Testing your key

Follow the directions in this article from GitHub to verify your SSH connection (Don’t forget to omit the $ when you copy and paste the code!). You should see this response in your terminal: Hi username! You’ve successfully authenticated, but GitHub does not provide shell access. Fear not the part about not being provided shell access. If you see this message, you’ve successfully added your SSH key and you can move on. If the output doesn’t correctly match up, then try going through these steps again or come to the Discord chat to ask for help.

Step 3: Let us know how it went!

You’ve completed the basic installations section, good job! As you progress through the Paths there will be other tools to install, so keep an eye out!

You probably felt like you were in way over your head, and you probably didn’t understand much of what you were doing. That’s 100% normal. Hang in there. You can do this! And we’ve got your back.

Improve this lesson on GitHub

Have a question?

Chat with our friendly Odin community in our Discord chatrooms!

Open Discord